home *** CD-ROM | disk | FTP | other *** search
- Path: patpserv.epfl.ch!potter
- From: potter@patpserv.epfl.ch (Christopher Potter)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: [HELP] A4091 + CV64 + A4000 !!
- Date: 21 Mar 1996 09:16:10 GMT
- Organization: Ecole Polytechnique Federale de Lausanne
- Distribution: world
- Message-ID: <4ir6oq$6cr@info.epfl.ch>
- References: <4ipaa0$g6u@info.epfl.ch> <4ipvqo$t9f@fcnews.fc.hp.com>
- NNTP-Posting-Host: patpserv.epfl.ch
-
- In article <4ipvqo$t9f@fcnews.fc.hp.com>, tomk@fc.hp.com (Tom Kennedy) writes:
- |> Christopher Potter (potter@patpserv.epfl.ch) wrote:
- |> : I have a very nice CV64 since 6 months. I works great.
- |>
- |> : However, I just bought a second-hand A4091 SCSI-II board. After
- |> : installation of the board, the CV64 was not reconized anymore and
- |> : the same for the 4091 (Showconfig did not mention a scsi board).
- |>
- |> : I removed the cv64, and still the 4091 was not reconized !!
- |>
- |> : Did I bought a non-working board ? (however I know very well the owner,
- |> : therefore I don't think it is the case)
- |>
- |> : Info: I have not Scsi devices attached, no terminators, the ROM is v40
- |> : and I have KS 3.0.
- |>
- |> Do you have Superbuster rev 11? The 4091 requires a rev 11
- |> superbuster to work. (I have a rev 11 SB, 4091, and CV64, and they
- |> work great together.)
- |>
-
- Yes, I have rev11 buster. Anyhow, it seems that I solve the problem.
- I changed the ROM (v40) with an older one and now everything is working.
- Therefore I suspect that the ROM was defective and/or not the good one
- for OS 3.0 system.
-
- Thanks again.
- -------------------------------------------------+
- Christopher Potter | CRAY T3D - 256 DEC alpha
- CRAY T3D support/Parallel Applications Engineer | 20000 MFLOPS Sustained
- EPFL-CRAY PATP Project |
- E-Mail: potter@patpserv.epfl.ch | Amiga 4000 - 1 MC68030
- -------------------------------------------------+
- ** PGP Public key on request
- ** Neither talking for CRAY nor EPFL
-